ATGA Dash Cam

Device Specifications

Product Model:

ATGA DC100

CPU:

Hisilicon 3516C_V200

Image sensor:

Panasonic CMOS sensor

Lens:

6-glasses, 152 degree Wide Angle, F1.8

Wi-Fi:

2.4GHz, 802.11b/g/n

G-sensor:

three-axi accelerometer

Video information:

1920x1080(16:9), @30fps *.mp4

Audio information:

8KHz, 2 channels, ACC

Photo information:

1920x1080, *.JPG

Storage:

Class 10 SD card, up to 64GB

Working temperature:

-20 C - 70 C

Working voltage & current:

DC 5V/1A

Video processing:

3D denoising, image enhancement, LDC correction

Installation Manual

When preparing to install the DC100 dash camera it is important to ensure you have read the installation instructions.

Important tips

Do not connect the DC100 to power until the install is complete.
Plan the fitment to ensure a fast and neat fitment.
Clean the surface the DC100 bracket will be mounted to.
Insert the 64GB SD card provided.
If you have any questions contact info@atga.com.au

Installation - Plug and Play

The DC100 has an optional cigarette plug harness available contact info@atga.com.au to find out more. Please note this will impact the parking surveillance feature.

1. Download the ATGA DASH CAM app from the Google Play or Apple App store
2. Insert the 64GB SD card provided – This can be formatted within the APP.
*ATGA DC100 supports up to a 64GB Micro SD card. Class 10 is required.

SD card slot
3. Mount the camera in the correct position to ensure the image is the correct orientation. The camera should also be mounted in a position which will not obscure the driver’s vision.

Note: make sure the Photo Capture Sensor faces downward.
HINT – An area close to the rear view mirror provides a neat and “hidden” location.
4. Connect the approved DC100 cigarette power cable to the outlet and run the micro USB end to the DC100. It is recommended to covertly install the power harness to avoid accidental disconnection or damage.
5. Hide the excess cable in an appropriate location and plug in the power cable to the DC100. When the outlet receives power the DC100 will turn on.

Installation - Hardwire

The DC100 comes standard with a hardwire kit to ensure it is operational when you need it most! The DC100 power kit includes a voltage “cut out” function (default is 11.8V) to keep your car battery full. It is recommended to have a professional complete the fitment.

1. Download the ATGA DASH CAM app from the Google Play or Apple App store.
2. Insert the 64GB SD card provided – This can be formatted within the APP.
*ATGA DC100 supports up to a 64GB Micro SD card. Class 10 is required.

SD card slot
3. Mount the camera in the correct position to ensure the image is the correct orientation. The camera should also be mounted in a position which will not obscure the driver’s vision.

Note: make sure the Photo Capture Sensor faces downward.
HINT – An area close to the rear view mirror provides a neat and “hidden” location.
4. Select an appropriate installation location within the vehicle which will provide a constant power connection and a strong earth to the chassis or approved earth point. Please see diagram below.
NOTE - To change the power protection voltage push down the white tab of the voltage you wish to have the cameras turn off at.
5. When running the power cable for the DC100 be sure to hide the cable for a neat and professional finish.
6.Ensure the excess from the power cable is hidden and secured in place.

Features

Device Specifications

Installation Manual

Installation - Plug and Play

Installation - Hardwire